-
-
Hi,
Having fitted LED indicators, including LED relay, I’ve experienced problems getting the lights to flash. I can now get them to flash, and at the correct speed via the relay, but they are not completely switching off and thenon. There is a small amount of light that stays on when the flasher should be cycling to the off phase.
Original indicators have only 2 wires but the new ones have an additional DLT. I have connected black to black on relevant indicator and red wire and white wire from new indicators are now connected to the relevant wire (brown to the left and green to the right.
Is anyone able shed some light on how to resolve this issue?
Many Thanks
Karl
-
You must be logged in to reply to this topic.